COLOR CHANGE TECH JACKET (BLACK)

€179,90

Taxes included.

Shipping calculated at checkout.

Größe

XXL

SHIPPING

Once your order ships, you’ll receive a tracking link via email.

SHIPPING COSTS

For more detailed shipping information, please check our Shipping Policy.

RETURNS

If an item doesn’t fit or doesn’t meet your expectations, you can register your return via our Return Portal.

Please note: Return shipping costs are borne by the customer.

For step-by-step return instructions, please refer to our Return Instructions.

For detailed return conditions, please refer to our Refund Policy.

Hand wash only
Do not machine wash
Do not tumble dry
Air dry only
Washing may reduce the water-repellent performance. We recommend re-proofing after washing

Because technical materials require special care, we recommend professional cleaning . Alternatively, please contact our customer support team for further guidance

Tech Jacket

SIZE	CHEST	HEM	SLEEVE LENGTH	BODY LENGTH
XS	58,5	56	82	66,5
S	61	58,5	83	68,5
M	63,5	61	84	70,5
L	66	63,5	85	72,5
XL	68,5	66	86	74,5
XXL	71	68,5	87	76,5

All measurements are taken with the garment laid flat — not on the body.

CHEST: Lay the garment flat and smooth. Measure straight across from armpit to armpit. (This represents half the chest width. For the full circumference, multiply by two.)
LENGTH: Measure from the highest point of the shoulder (HPS) – where the shoulder seam meets the neckline – straight down to the bottom hem.
SLEEVE: Measure from the shoulder seam straight down the outer edge of the sleeve to the cuff.
HEM WIDTH: Measure straight across the bottom hem from side seam to side seam (again, this is half the width).

IMPORTANT NOTES:

Due to the nature of the fabrics and production process, slight variations of up to ±1.5 cm may occur.
Elastic or heavy materials can slightly shift when laid flat – make sure to smooth the garment without stretching it.
For best accuracy, compare the measurements with a similar item you already own that fits you well, measured the same way.
Small rounding differences are normal and do not affect the overall fit within the standard tolerance range.